Modeling 4-Chlorophenol Removal from Aqueous Solutions by Granular Activated Carbon

Since phenols and phenolic compounds in many industrial wastewaters are toxic organic contaminants for humans and aquatic life, to remove these compounds via the most efficient way is very important for environmental remediation treatment. In this context, almost all of the isotherm models (Freundlich, Langmuir, Temkin, Redlich–Peterson, Sips, and Khan) for adsorption in the literature were applied to explain the adsorption mechanism of 4-chlorophenol on activated carbon in this study. Also theoretical modeling data were obtained using model equations; interpolation and analysis of variance were made to compare data by using statistics software. In addition, the thermodynamic and kinetic studies for adsorption mechanism were included in the article. The adsorption of 4-chlorophenol on activated carbon fits well to the pseudo-first-order kinetic model than the pseudo-second-order, intraparticular diffusion and Bangham models. It is also indicated that 4-chlorophenol adsorption by granular activated carbon would be attributed to a type of transition between physical and chemical adsorption rather than a pure physical or chemical adsorption process. As a result, an environmental remediation problem and the adsorption mechanism on activated carbon that can be regarded as a solution to this problem are described and explained using the mathematical models and calculations in this study.     

Mineralisation of Monuron photoinduced by Fe(III) in aqueous solution

The degradation of Monuron (3-(4-chlorophenyl)-1,1-dimethylurea) photoinduced by Fe(III) in aqueous solution has been investigated. The rate of degradation depends on the concentration of Fe(OH)2+, the most photoreactive species in terms of *OH radical formation. These *OH radicals are able to degrade Monuron until total mineralisation. The primordial role of the speciation of Fe(III)-hydroxy complex in aqueous solution, for the efficiency of the elimination of pollutant, was shown and explained in detail. The formation of Fe(II) in the irradiated solution was monitored and correlated with the total organic carbon evolution. Degradation photoproducts were identified and a mechanism of degradation is proposed.     

Downward Migration of Dense Bottom Currents

The focus of this paper is on the dynamics of a dense current flowing along the continental slope, and the frictionally induced downward motion it experiences. In particular, the movement of the lateral boundaries where the isopycnals meet the bottom are considered. The current is taken to be wide compared to the Rossby radius, which is in accordance with observations and makes the dynamics quasigeostrophic. The time development of the plume thickness is studied, using three different parameterisations for the bottom friction.Independently of the choice of parameterisation, the following results are obtained: In the central part of the plume friction acts as a diffusive process to minimise the curvature of the upper surface of the plume. At the upper edge the plume quickly approaches a state with small slope, i.e. small geostrophic velocity and small frictionally induced downward flow. At the lower edge a tongue of dense water shoots out creating a widening layer. The thickness of the migrating layer is approximately equal to the boundary layer depth and its downward speed is comparable to the along-slope geostrophic velocity. The downslope end of the migrating layer may form a steep front which requires some precautions in the numerical procedure.     

Dioxins,chlorophenols and other chlorinated organic pollutants in colloidal and water fractions of groundwater from a contaminated sawmill site

BACKGROUND, AIM, AND SCOPE: The distribution of chlorinated organic contaminants in groundwater and the importance of colloids were studied in groundwater from a sawmill site contaminated by chlorophenol preservatives. MATERIALS AND METHODS: The groundwater was fractionated into three different size ranges: (1) >0.7 mum, (2) 0.4-0.7 mum and (3) 0.2-0.4 mum and the filtered water phase. The concentrations of chlorophenols (CP), chlorinated phenoxy phenols (PCPP), chlorinated diphenyl ethers (PCDE), chlorinated dibenzofurans (PCDF) and chlorinated dibenzo-p-dioxins (PCDD) were determined in each fraction. The colloids were characterised regarding the chemical composition using X-ray photoelectron spectroscopy (XPS). RESULTS: Chlorophenols were mostly found in the water fraction and PCDD/Fs were found almost exclusively in the particulate fractions. For example, the filtered water phase contained 2,100 mug l(-1) and 0.72 ng l(-1) for CPs and PCDD/Fs, respectively, and the particulate fractions contained 27 mug l(-1) and 32 ng l(-1) for CPs and PCDD/Fs, respectively. XPS evaluation of the particulate phases showed no correlation between the surface chemistry of the particle properties and the distribution of chlorinated compounds. DISCUSSION: The results suggest that groundwater transport of CPs, PCPPs, PCDEs and PCDD/Fs may occur from contaminated sawmill sites and that the colloid-facilitated transport, especially of PCDD/Fs, is substantial. The results correlated well with previous studies of compounds sorbed to dissolved organic carbon, which indicate that dissolved and colloidal organic carbon facilitated the transport of PCDEs, PCDFs and PCDDs particularly. CONCLUSIONS: Several classes of chlorinated compounds were readily detected in the groundwater samples. Due to the differences in their physicochemical properties, CPs, PCPPs, PCDEs and PCDD/Fs vary in their partitioning between colloidal fractions and the filtered groundwater. The proportion of the bound fraction increased with an increasing hydrophobicity of the chlorinated compounds. The groundwater transport of colloid-associated pollutants from the site may be significant. RECOMMENDATIONS AND PERSPECTIVES: The results imply that colloidal particles <0.7 mum are freely mobile in groundwater from this site. The groundwater transport of colloid-associated pollutants may be significant. However, the extent of the problem is not yet known and, thus, further research is needed to evaluate the impact of colloidal transport of hydrophobic organic contaminants. In Sweden alone, 400 to 500 sawmill sites are estimated to be contaminated with PCDD/Fs as a result of the former use of CP-based wood preservatives. The widespread use of CP mixtures for a variety of applications, including wood preservation, indicates that potential colloidal transport will be an issue of concern in many countries.     

Chlorinated and brominated organic contaminants in fish from Shanghai markets: a case study of human exposure

In the present study were two favorite edible fish species for local residents, i.e., mandarin fish and crawfish, collected from the Shanghai market and analyzed for selected organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), hexabromocyclododecane (HBCDD), polybrominated diphenyl ethers (PBDEs) and methoxylated PBDEs (MeO-PBDEs). Efforts were also made to identify the potential sources of these contaminants. Comparable concentrations of hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs) and HBCDD were found in muscle tissue of mandarin fish from Guangdong (GDF), the Pearl River Delta and from Taihu Lake (TLF), the Yangtze River Delta. Levels of chlordanes, PCBs and PBDEs were about one magnitude lower in TLF compared to GDF. The concentrations of OCPs in the butter-like gland of the crawfish (CFB) were 2-5 times of those in the crawfish muscle (CFM) while concentrations of PCBs, PBDEs and MeO-PBDEs were comparable. The different patterns and levels of chlorinated and brominated organohalogen contaminants seen in mandarin fish from GDF and TLF indicates that different types of chemicals might be used in the two delta regions. The present study also shows a good correlation between the concentrations of hexachlorobenzene (HCB) and pentachloroanisol (PCA) in fish for the first time. Fish consumption limits based on chemical contaminants with non-carcinogenic effects were calculated. The estimated maximum daily consumption limit for GDF, TLF, CFM and CFB were 1.5, 2.6, 3.7 and 0.08 kg, respectively, indicating no significant risk regarding the persistent organic pollutants measured in the present study.     

Mutagenic and recombinagenic activity of airborne particulates, PM10 and TSP, organic extracts in the Drosophila wing-spot test

The genotoxicity associated with air pollution in the city of Canoas, Rio Grande do Sul (Brazil), was assessed in November (spring) and January (summer). We applied the somatic mutation and recombination test (SMART) in Drosophila melanogaster in its standard version with normal bioactivation (ST) and in its variant with increased cytochrome P450-dependent biotransformation capacity (HB). The data indicated the genotoxicity of TSP and PM10 collected in November, in both ST and HB crosses. The genotoxic activity of the PM10 material in the spring sample was exclusively associated with the induction of mitotic recombination, whereas the TSP genetic toxicity was due to both recombinational as well as point and/or chromosomal mutation events. Considering PM10 collected in January, a positive response--100% (17.10 m3/ml) concentration--was observed in the HB cross, which was not detected in the ST cross.     

Initial Screening of Contaminated Land: A Comparison of US and Swedish Methods

Preliminary surveys are used to prioritize between contaminated sites to select those to be investigated more thoroughly. The data-gathering steps are almost identical between countries; however, the assessment procedures differ significantly. In this study, we have investigated 21 contaminated sites assessed as belonging to the high-risk or the very high-risk class using the Swedish Methods for Inventories of Contaminated Sites (MICS). We then applied the US Preliminary Assessment (PA) method to the same sites and compared the results and conclusions from the two screening procedures. In both cases, all sites were recommended for further investigation and the two approaches seem to corroborate one another; however, the PA assessment scores and the preliminary MICS classifications did not correlate. The results obtained with the PA method were easier to explain than the final MICS classification. The PA method also seems more transparent and easier to standardize, although objections could be made regarding the weighting scheme, because the outcome in this study was entirely dependent on the surface exposure pathway. However, to examine this in greater detail, it is necessary to include sites with less contamination: The importance of preliminary surveys in the overall risk management process gives a strong motivation for such an evaluation. Generally, the lack of research and scientific support for the various assessment procedures in use suggests that there is a need for method development, standardization, and validation.     

Adaptive capacity determinants in developed states: examples from the Nordic countries and Russia

Adaptive capacity in a community context has so far mainly been studied in developing countries as well as indigenous communities in the industrialised world. This article adds to that literature through reviewing studies undertaken in the Nordic countries and Russia, highlighting the ways in which general determinants of adaptive capacity play out in Northern, industrialised contexts. The paper illustrates that the determinants of adaptive capacity in industrialised states exhibit systematic differences from mixed subsistence-cash based communities such as those found in Arctic Canada. We discuss in particular the importance of economic resources in a market-based system, technological competition, and infrastructure, in determining adaptive capacity of natural resource-dependent communities in the Nordic countries and Russia. The paper also illustrates differences in adaptive capacity within the case study region, including between peripheral and central locations with regard to economic resources and diversification possibilities, and between Nordic and Russian cases with regard to infrastructure and technology access. The findings indicate that understanding of determinants of adaptive capacity in resource-dependent communities would benefit from both further contextualisation and broad comparison, across different types of political and administrative systems.     

Users' views of hospital environmental quality: Validation of the Perceived Hospital Environment Quality Indicators (PHEQIs)

Environmental Quality Perception (EQP) is an important construct used to help to understand the relationship between people and the hospital environment. From a patient-centered care perspective, it is important that hospital design take into account the patients' (and other users') point of view. This paper presents the adaptation and validation of a measure of hospital EQP, the Perceived Hospital Environment Quality Indicators (PHEQIs; Fornara, Bonaiuto, & Bonnes, 2006), and seeks to confirm the factor structure of this construct in a different cultural context. Three scales, two focusing on physical environments and one evaluating the social environment, were completed by 562 users of four orthopedic units in Portuguese hospitals, two older and two recently built or renovated. To assess criterion validity, hospital physical environments were also objectively evaluated by two architects. Using a confirmatory factor analysis the three validation procedures produced acceptable fit indices in the final measurement models. Overall reliability values were satisfactory, as was the evidence for criterion validity. PHEQIs scales and factors correlated with global evaluation of the environment, supporting concurrent criterion validity; and predictive criterion validity was demonstrated given that users of older and newer hospitals differed significantly on the perception of quality of hospital EQP, and that high congruence between users' and experts' evaluations was found. Discriminant construct validity was supported, and some difficulties in showing convergent validity are discussed in terms of item formulation adequacy. Implications for research and practice are described.     

Reductive debromination of nonabrominated diphenyl ethers by sodium borohydride and identification of octabrominated diphenyl ether products

A method was developed to study reductive transformation of highly brominated diphenyl ethers (BDEs). The method development is a part of a broader project where it will be used to determine the susceptibility of environmental pollutants to reductive conditions, in an attempt to create a scheme for determination of chemical’s persistence. This paper focuses on identification of octabrominated diphenyl ether transformation products from reductive debromination of the three nonabrominated diphenyl congeners (nonaBDE), BDE-206, -207 and -208. Sodium borohydride was used to explore the reductive debromination of the nonaBDEs. The transformation products were collected at two time-points and identified products were quantified by GC-MS. The reduction of the nonaBDEs lead primarily to debrominated products, mainly octaBDEs. The three nonabrominated DEs gave isomer-related transformation product patterns. BDE-207 and BDE-208 showed a propensity for ortho-debromination in the initial reaction step, while no discrimination between initial debromination positions was seen for BDE-206. All three nonabrominated DEs displayed a preferred initial debromination on the fully brominated DE ring.